* It has a monocrystalline solar cell A-level chip, which can be used in mobile phones, power banks, etc.
* Adopt advanced polyethylene coating technology, the surface of the battery is sealed with epoxy resin, and the color is beautiful.
* Light weight and easy to carry. High conversion rate and high output. High stability and good durability.
* High conversion efficiency, good output efficiency, light weight, convenient carrying and strong applicability.
* Anti-scratch, non-foaming, easy to clean.
* Strong resistance, able to withstand different environments, and good waterproof performance.
* All battery positive and negative electrodes are made of high-quality silver paste with high welding strength and low series resistance.
* Fold the bag to better receive sunlight after unfolding. Convenient storage after folding, saving space.
* Scope of application: car batteries, automobiles, RVs, ships, airplanes, satellites, space stations, outdoor breeding, planting, tourism, solar street lights.
Maximum power (pmax): 300W
Open circuit voltage (voc): 20V
Maximum power voltage (vmpp): 18V
Short circuit current (isc): 1A
Maximum power current (impp): 0.75A
Output: MC4 18V
Certification: CE FCC
1. When using the solar controller to charge the battery, the controller will automatically check the voltage.
2. When transferring positive and negative charges to the controller, do not reverse.
3. Connect the solar panel to the solar controller.
Voltage: 12V/24V automatic identification
Rated charging current: 30A
Rated discharge current: 10A
The highest photovoltaic voltage: 12V system＜23V/24V system＜46V
USB output: 2 USB outputs, maximum 5V/2A
Standby current: <10mA
Working temperature: -35℃~+60℃
Certification: CE RoHS
Size: 133 * 70 * 35mm
Color: as show
Note: Strictly comply with solar panels and solar controllers. Otherwise, the solar controller may be damaged.
1. Connect the battery to the charge regulator-plus and minus.
2. Connect the photovoltaic module to the regulator-plus and minus.
3. Connect the consumer to the charge regulator-plus and minus.
* Compatible with high-power electrical appliances, pure sine wave full power without imaginary lines, 220V output compatible range.
* USB output, 5V-1A/2.1A supports a variety of digital products.
* Intelligent silent fan, intelligent silent temperature control, strong heat dissipation to reduce internal temperature, longer use. This
* Equipped with pure copper wire core power cord, alligator clip wire + lighter wire, thick pure copper wire core, low power consumption, stable transmission.
Display: LCD digital display
Peak power: 1200W
Output frequency: 50Hz
Output voltage: 220V+5V-1A/2.1A USB
Input voltage: 12V
Packing included: as you choose
1. Please allow 1-3cm (0.4-1.18″) difference due to manual measurement and slight color variation for different display setting.
2. Due to the light and screen difference, the item’s color may be slightly different from the pictures. Please understand.